**Super 1/2" Translucent* Storm Stoppers**^®:

Has passed the Large Missile Impact Test for Wind Zones 3 & 4!

THICKER (1/2") Translucent Waterproof Corrugated Plastic

STRONGER Dual Lock™ Fasteners

All the other same great features of the Original Storm Stoppers®*

SUPER 1/2" TRANSLUCENT* Storm Stoppers®:

Super 65 X 108” Storm Stopper®:

Installation kit contains 65 pairs of Dual Lock Fasteners, Location Labels, NEW arthritis friendly E-Z removal handles & a 1/2” thick, 65 X 108” sheet of translucent corrugated plastic.

Super 74 X 80” Storm Stopper®:

Installation kit contains 55 pairs of Dual Lock Fasteners, Location Labels, NEW arthritis friendly E-Z removal handles & a 1/2” thick, 74 X 80” sheet of translucent corrugated plastic

Adhesive Bonding Promoter: (sold separately, but required) available in various sizes

Note: Each Storm Stopper® installation kit has enough Dual Lock™ fasteners for the perimeter of 1-2 windows. If your panel yields more window sizes, and/or you wish to place Dual Lock™ on your window crossbars, you will need to purchase additional fasteners below.

Additional Items:

Replacement Dual Lock™ Fasteners for Super Storm Stopper®

Narrow Dual Lock™ Fasteners (For smaller window frames)

Cutting, installation & delivery also available. Contact your local Retail Dealer for prices (see “Where to Buy” section).

* Translucent Storm Stoppers^® products are to be used for storm (e.g. hurricane or tropical storm) protection only, and should be utilized only immediately before, during, or immediately after a severe storm is expected to affect your home. Once the danger passes, all Translucent Storm Stoppers^® products are required to be removed and stored indoors, out of direct sunlight.

Super Translucent Storm Stoppers® have been

successfully lab impact tested to the ASTM E1996-03

Large Missile Impact Test Standard

for Wind Zones 3 & 4 - greater than 140 mph *

Super Translucent Storm Stoppers® were lab tested on December 21, 2005 at a state-accredited certified testing lab. The tests performed were to the ASTM E1996-03 Large Missile Impact Test Standard, which is described as “Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Storm Shutters Impacted by Windborne Debris in Hurricanes.” (Impact Only)

This impact test is designed to simulated an impact from windborne debris in winds greater than 140 mph.

The large missile impact tests were conducted using a #2 Southern Yellow Pine 2 X 4' measuring 96" in length and weighing 9.25 lbs (Missile D). The test material was a 65" X 108", 1/2” thick translucent corrugated plastic Storm Stopper® panel. An adhesive bonding promoter was applied to the Storm Stopper® panel under the 3M Dual Lock™ fasteners.

(To play the video, click the ► button above.)

The test specimen was fastened to a 65" x 108" white aluminum window frame with 3M Dual Lock™ fastener pairs, spaced 3" apart. Six (6) impacts were done on three (3) separate panels (2 each) with no penetration.

*NOTE: Super 1/2" Translucent Storm Stoppers®

are not Florida Building Code approved.

Click here to see the Original Storm Stoppers® Lab Testing

Home / About Us / Contact us / Pressroom / Where to Buy

Super 1/2" Translucent* Storm Stoppers ®:

**Super 1/2" Translucent* Storm Stoppers**^®: