Note:
Storm Stoppers® meets the 3rd requirement
under the “Hurricane” rating of
Section 8, Opening
Protection, of the Uniform Mitigation
Verification Inspection Form as shown in the
PDF download at
the bottom of the page. If you would
like to receive a certified copy of our Lab Test
Report for potentially receiving a homeowner’s
insurance discount, please see below:
Regarding the Uniform Mitigation Verification
Inspection Form (OIR-B1-1802 rev 07/07), please
note that Original 3/8” & Super 1/2" Storm Stoppers®
meet the last criteria in
Section 8, Opening
Protection (page 2).
This criteria is:
“ASTM E 1886 and
ASTM E 1996 Missile Level C.” Original
3/8” Storm Stoppers® were Lab Impact Tested to ASTM
E 1886 and ASTM E 1996 Standards using Missile Level
C. Super 1/2" Storm Stoppers® were Lab Impact
Tested to ASTM E 1886 and ASTM E 1996 Standards
using Missile Level D, which “grandfathers in”
Missile Level C. This information is reflected in
Storm Stoppers® respective Original 3/8” and Super
1/2" Lab Impact Test Reports, which are available
at no charge
for all Storm Stoppers® customers and My Safe
Florida Home Mitigation Inspectors.
To
get a certified copy of our Lab Test Report, please
fill out the contact us
form
with “Certified Test Report Request” in the
description area. We will need a copy of the customer’s
original purchase invoice to prove the customer has
Storm Stoppers®. The original invoice will also
show which Storm Stoppers® product (i.e. Original
3/8” or Super 1/2") the customer has. Please fax
this to us at
407-423-1107. Once we receive this
information, we will process your request and mail
the customer a certified copy of the Lab Impact Test
report within 48 hours. The certified Test Report
is printed on a special “Kan’t Kopy” paper and will
produce an “Unauthorized Duplication” message if
faxed, scanned or copied. Thus, it is only possible
to mail it to the customer.
If
you have any questions, please call our office at
407-423-5959. Thank you.
Download the
Uniform Verification Mitigation Form Here.